What are the four steps for using a fire extinguisher?

General
1

what are the four steps for using a fire extinguisher?

2

LectureNotes said what are the four steps for using a fire extinguisher?

Answer:
Using a fire extinguisher effectively can be crucial in an emergency. The four steps for using a fire extinguisher can be remembered using the acronym PASS:

  1. Pull the pin:

    • Start by pulling the pin at the top of the extinguisher. This action breaks the tamper seal and allows you to discharge the extinguisher.

  2. Aim the nozzle:

    • Aim the nozzle or hose at the base of the fire. It is important to target the base of the fire, where the fuel source is, rather than the flames, to effectively extinguish it.

  3. Squeeze the handle:

    • Squeeze the handle or lever to release the extinguishing agent. Maintain a firm grip and control the flow of the agent.

  4. Sweep from side to side:

    • Sweep the nozzle or hose from side to side at the base of the fire until it appears to be out. Continue to apply the agent even after the flames are extinguished to prevent re-ignition.

By following these steps, you can maximize the effectiveness of a fire extinguisher and increase the chances of safely putting out a fire. Always remember to ensure your safety first and evacuate if the fire cannot be controlled.